How to deal with rubber sticking to the roller of the open mill? The reason for the adhesive on the roller of the open mill:

1. The temperature of the open mill is too low;


2. When cleaning the roller of the open mill, toluene was used to wipe the roller;


3. The adhesive is too sticky.

Solution for adhesive on roller of open mill:

  1. If it is caused by the low temperature of the open mill or the strong viscosity of the rubber material, the roller temperature of the open mill can be refined with high hardness material, and the temperature can be solved by reaching around 40 degrees Celsius

2. If toluene is used to wipe the rollers of the open mill during cleaning, the material should be cleaned bit by bit first, then the rollers should be cleaned with white electric oil, and then wiped with rust proof oil. After cleaning, the rollers can be cleaned